RAD: ETX-2i
Carrier Ethernet Demarcation
Part of RAD’s Service Assured Access solutions, the ETX-2i ethernet platform is a line of next-generation NID/NTUs and carrier Ethernet demarcation device options that enable advanced networking demarcation SLA-based, L2 and L3 business services, wholesale services and mobile backhaul. The ETX-2i offers a variety of Ethernet network products supporting these connections: 1-GbE, 10-GbE (10GB Ethernet) and 100-GbE (100G ethernet CPE).
1G/10G/100G Ethernet Demarcation Indoor / Outdoor Options NID / NTU's
The ETX-2i provides MEF 3.0 demarcation and aggregation over any access, including over LTE/broadband. Its FPGA architecture flexibly adapts to future customer needs.
As a modular demarcation device, the ETX-2i enables operators to deliver the most advanced Carrier Ethernet services, IP VPNs and vCPE functionalities over any network connection. In addition, the ETX-2i combines advanced timing functionalities for LTE/LTE-A.
- Up to eight GbE combo ports
- Integrated wire-speed switch/router
- Modular network interfaces: FE/GbE (combo), E1/T1, T3, VDSL2, or SHDSL
- Flexible synchronization offering Sync-E, IEEE 1588v2 slave, BC and TC for frequency and phase synchronization in mobile networks
- Hot-pluggable x86 D-NFV server module for hosting virtual functions
- NEBS-compliant and environmentally hardened enclosure options
- 3U device with six GbE combo ports and 64 x E1/T1, offering high scale, cost-effective TDM over packet services
- Network elements supporting O-RAN deployments
![RAD: ETX-2i 1 ETX-2i](https://b3231221.smushcdn.com/3231221/wp-content/uploads/2023/02/ETX-2i_1.png?lossy=1&strip=1&webp=1)
Key Take Aways
with embedded physical network functions in a single device to optimize inventory
of Carrier Ethernet demarcation and aggregation capabilities, up to 100 GbE rates
ETX-2i Series
Available as a modular demarcation device, the ETX-2i enables operators to deliver the most advanced Carrier Ethernet services, IP VPNs and vCPE functionalities over any network connection. In addition, the ETX-2i combines advanced timing functionalities for LTE/LTE-A.
- Up to eight GbE combo ports
- Integrated wire-speed switch/router
- Modular network interfaces: FE/GbE (combo), E1/T1, T3, VDSL2, or SHDSL
- Flexible synchronisation offering Sync-E, IEEE 1588v2 slave, BC and TC for frequency and phase synchronisation in mobile networks
- Hot-pluggable x86 D-NFV server module for hosting virtual functions
- NEBS-compliant and environmentally hardened enclosure options
- 3U device with six GbE combo ports and 64 x E1/T1, offering high scale, cost-effective TDM over packet services
- Network elements supporting O-RAN deployments
The ETX-2i-10G combines intelligent, high bandwidth demarcation and aggregation capabilities for enterprise headquarters and mobile backhaul operators. As an aggregation solution at the concentration point, a single unit can support numerous services and concurrent OAM sessions.
- 19” unit with up to four 10-GbE and up to 24 GbE ports in various combinations
- Half-19” unit with up to four 10-GbE and up to eight GbE ports in various combinations
- Flexible synchronization offering Sync-E, IEEE 1588v2 slave, BC and TC for frequency and phase synchronisation in mobile networks
- ITU-T G.8032 Ethernet Ring Protection Switching
- NEBS-compliant and environmentally hardened enclosure options
- Network elements supporting O-RAN deployments
ETX-2i-100G delivers the full suite of Carrier Ethernet demarcation and aggregation capabilities, at 100 GbE rates. ETX-2i-100G addresses the increasing demand for high bandwidth access to data centres, while maintaining MEF CE 2.0 SLAs, service monitoring, flexibility and management.
- 19”, 1RU with redundant power supply
- Two 100G platforms:
- Three 100-GbE (QSFP28) and 10 x 1/10-GbE SFP+ interfaces
- Four 100-GbE (QSFP28) and 16 x 1/10-GbE SFP+ interfaces
- Advanced QoS with hierarchical policing and bandwidth shaping per EVC and EVC.CoS
- Accurate and scalable hardware-based OAM and performance monitoring per ITU-T Y.1731 and TWAMP
- Y.1564 service activation testing at wire-speed
- Network elements supporting O-RAN deployments
The ETX-2i-10G combines intelligent, high bandwidth demarcation and aggregation capabilities for enterprise headquarters and mobile backhaul operators. As an aggregation solution at the concentration point, a single unit can support numerous services and concurrent OAM sessions.
- 19” unit with up to four 10-GbE and up to 24 GbE ports in various combinations
- Half-19” unit with up to four 10-GbE and up to eight GbE ports in various combinations
- Flexible synchronization offering Sync-E, IEEE 1588v2 slave, BC and TC for frequency and phase synchronization in mobile networks
- ITU-T G.8032 Ethernet Ring Protection Switching
- NEBS-compliant and environmentally hardened enclosure options
- Network elements supporting O-RAN deployments
![RAD: ETX-2i 6 vCPE for Business and Wholesale Services](https://b3231221.smushcdn.com/3231221/wp-content/uploads/2023/02/vCPE-for-Business-and-Wholesale-Services-768x443.png?lossy=1&strip=1&webp=1)
Get in touch to talk about your project
We can help!
Our expert team are waiting for your call to assist!
Your Project
Whether you are at the beginning or ready to specify your project requirements we are ready to take your call.
The way forward
Every project is different, our expert team adapts and works with you towards your solution.
- +44 (0)1322 552 000
Search ETX-2i Products
Product | SKU | Category | Description |
---|---|---|---|
Switch Switch | wide-range power supply, 2 SFP Ethernet ports, 4 empty SFP… | ||
Switch Switch | dual DC feed power supply, D-NFV-ready, 2 SFP Ethernet ports… | ||
Switch Switch | wide-range power supply, 2 SFP Ethernet ports, 4 Ethernet UTP… | ||
Switch Switch | extended temperature, wide-range power supply, 2 SFP Ethernet ports, 4… | ||
Switch Switch | extended temperature, wide-range power supply, 2 SFP Ethernet ports, 8SFP | ||
Switch Switch | 10GbE Demarcation Device, 19" 1U metal box, extended temperature, NEBS… | ||
Switch Switch | 10GbE Demarcation Device, 19" 1U metal box, AC and DC… | ||
Power Supply Accessories | 100-240 VAC | ||
Power Supply Accessories | DC power supply | ||
Licence Software | License for ETX-2I-10G-B/8SFPP, 10 GB activation license for 8 ports | ||
Power Supply Accessories | high-power DC power supply for DNFV | ||
Licence Software | 10 Gb activation license for 2 ports | ||
Enclosures & Rackmounts Accessories | Swappable power supply for ETX-2i-10G-B, extended temperature, 100-240 VAC, Outdoor… | ||
Power Supply Accessories | 24V/48V DC (20-60VDC) | ||
Licence Software | L2/3 demarcation device, AC Power Supply, 19" metal box, 8… | ||
Licence Software | L2/3 demarcation device, dual high-power DC power supply for DNFV… | ||
Licence Software | L2/3 demarcation device, dual high-power AC power supply for DNFV… | ||
Licence Software | L2/3 demarcation device, extended temperature, dual DC feed power supply… | ||
Licence Software | L2/3 demarcation device, extended temperature, dual AC power supply, 19"… | ||
Licence Software | L2/3 demarcation device, extended temperature, redundant DC power supply, 19"… | ||
Licence Software | L2/3 demarcation device, extended temperature, AC Power Supply, 19" metal… | ||
Licence Software | L2/3 demarcation device, DC, 19" metal box, 8 GE ports… | ||
Licence Software | L2/3 demarcation device, AC Power Supply, 1/2 19" metal box… | ||
Licence Software | L2/3 demarcation device, extended temperature, DC, 19" metal box, 8… | ||
Licence Software | L2/3 demarcation device, extended temperature, AC Power Supply, 1/2 19"… | ||
Licence Software | L2/3 demarcation device, dual DC feed power supply, 1/2 19"… | ||
Licence Software | L2/3 demarcation device, redundant DC power supply, 19" metal box… | ||
Licence Software | L2/3 demarcation device, high-power AC power supply for DNFV, 19"… | ||
Licence Software | L2/3 demarcation device, extended temperature, AC Power Supply, 19" metal… | ||
Licence Software | L2/3 demarcation device, extended temperature, AC Power Supply, 19" metal… |